⟁ Utah Well Data field records · 2026 survey

Utah Well Data › Washington County › Saint George (84790)

Saint George, UT (84790): well depth, water level & drilling cost

✓ 173 Utah DWRi records · Washington County

200 ftmedian well depth
65 ft–300 fttypical depth range
54 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Saint George (84790) address — $49

How deep are wells in and around Saint George (84790), Utah?

The median drilled well depth in and around Saint George (84790) is 200 ft, based on 152 wells with recorded depths in the state Utah DWRi database. Half fall between 65 ft and 300 ft; 90% are shallower than 396 ft.

How much does it cost to drill a well in and around Saint George (84790)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Saint George (84790)?

The median static water level is 54 ft below ground surface (middle half of wells: 30 ft–95 ft), from 42 measurements.

Drilled depth distribution

0–50 ft 26 50–100 ft 23 100–150 ft 9 150–200 ft 13 200–300 ft 42 300–400 ft 23 400–600 ft 12 600+ ft 4
Looking at a specific property in Saint George (84790)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Saint George (84790)

Free. Goes to licensed drillers working Washington County.

Part of Washington County well records.

Method: medians computed from Utah DWRi records (Utah DWRi well logs; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.