⟁ Utah Well Data field records · 2026 survey

Utah Well Data › Beaver County › Milford (84751)

Milford, UT (84751): well depth, water level & drilling cost

✓ 606 Utah DWRi records · Beaver County

212 ftmedian well depth
68 ft–400 fttypical depth range
50 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Milford (84751) address — $49

How deep are wells in and around Milford (84751), Utah?

The median drilled well depth in and around Milford (84751) is 212 ft, based on 488 wells with recorded depths in the state Utah DWRi database. Half fall between 68 ft and 400 ft; 90% are shallower than 582 ft.

How much does it cost to drill a well in and around Milford (84751)?

Applying published per-foot rates to the local median depth of 212 ft: drilling and casing alone typically runs $5,300–$13,780; a complete system including pump, pressure tank, and hookup typically runs $12,720–$21,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Milford (84751)?

The median static water level is 50 ft below ground surface (middle half of wells: 29 ft–70 ft), from 146 measurements.

Drilled depth distribution

0–50 ft 72 50–100 ft 121 100–150 ft 22 150–200 ft 9 200–300 ft 53 300–400 ft 65 400–600 ft 105 600+ ft 41
Looking at a specific property in Milford (84751)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Milford (84751)

Free. Goes to licensed drillers working Beaver County.

Part of Beaver County well records.

Method: medians computed from Utah DWRi records (Utah DWRi well logs; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.