⟁ Utah Well Data field records · 2026 survey

Utah Well Data › Sanpete County › Spring City (84662)

Spring City, UT (84662): well depth, water level & drilling cost

✓ 156 Utah DWRi records · Sanpete County

240 ftmedian well depth
153 ft–400 fttypical depth range
85 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Spring City (84662) address — $49

How deep are wells in and around Spring City (84662), Utah?

The median drilled well depth in and around Spring City (84662) is 240 ft, based on 147 wells with recorded depths in the state Utah DWRi database. Half fall between 153 ft and 400 ft; 90% are shallower than 584 ft.

How much does it cost to drill a well in and around Spring City (84662)?

Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Spring City (84662)?

The median static water level is 85 ft below ground surface (middle half of wells: 40 ft–174 ft), from 32 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 14 100–150 ft 19 150–200 ft 26 200–300 ft 26 300–400 ft 24 400–600 ft 25 600+ ft 13
Looking at a specific property in Spring City (84662)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Spring City (84662)

Free. Goes to licensed drillers working Sanpete County.

Part of Sanpete County well records.

Method: medians computed from Utah DWRi records (Utah DWRi well logs; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.