⟁ Utah Well Data field records · 2026 survey

Utah Well Data › Cache County › Richmond (84333)

Richmond, UT (84333): well depth, water level & drilling cost

✓ 174 Utah DWRi records · Cache County

190 ftmedian well depth
140 ft–280 fttypical depth range
68 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Richmond (84333) address — $49

How deep are wells in and around Richmond (84333), Utah?

The median drilled well depth in and around Richmond (84333) is 190 ft, based on 159 wells with recorded depths in the state Utah DWRi database. Half fall between 140 ft and 280 ft; 90% are shallower than 389 ft.

How much does it cost to drill a well in and around Richmond (84333)?

Applying published per-foot rates to the local median depth of 190 ft: drilling and casing alone typically runs $4,750–$12,350; a complete system including pump, pressure tank, and hookup typically runs $11,400–$19,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Richmond (84333)?

The median static water level is 68 ft below ground surface (middle half of wells: 14 ft–104 ft), from 40 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 12 100–150 ft 31 150–200 ft 38 200–300 ft 43 300–400 ft 17 400–600 ft 11 600+ ft 5
Looking at a specific property in Richmond (84333)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Richmond (84333)

Free. Goes to licensed drillers working Cache County.

Part of Cache County well records.

Method: medians computed from Utah DWRi records (Utah DWRi well logs; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.